Resources
Concrete Cooling Guides and Resources
Practical pages on how concrete is cooled, what the specification is actually asking for, and how to plan a nitrogen pour without turning the method into a mystery.
On this page
Why these pages exist
Most of the value in concrete cooling is decided before a valve is opened. The specification has a number, the mix has a heat load, the calendar has a date, and the weather will or will not cooperate. These guides are written so that conversation can start from the same facts.
Nothing here replaces your project specification, a licensed engineer, or ACI committee documents. Where a common value is mentioned, it is described as common, not as a universal limit. Your document governs.
The pages are grouped the way a job actually unfolds. First you have to know which temperature in the specification is doing the work: a placement cap is a different problem from a peak or a differential limit on a mass placement. Then you have to know whether ice, chilled water, a night pour, or nitrogen is the method that fits, because the cheapest control that still meets the document is the one you should use. Then you have to plan supply, hookup, and the temperature record so the pour date is not the first time those questions are asked.
We also keep application pages here, next to the method pages, because a data-center mat, a wind-turbine foundation, and a summer ready-mix day are not the same conversation even when the lance is the same. If you already know the method and just need a crew, skip this hub and go to the quote form.

Specification and temperature
- Placement temperature, peak temperature, and differential — the three numbers that actually drive a cooling decision.
- Thermal cracking in mass concrete — why the core and the surface do not fail the same way.
- Temperature differential — the gap between core and surface, and why it is specified.
- Delayed ettringite formation — why peak temperature caps show up in specifications.
- ACI 207 and mass concrete temperature control — how committee guidance is used in practice.
- ACI 305 and nitrogen — using injection to support a hot-weather placement temperature.
- Specifier language — how nitrogen cooling is usually described in a package.
Methods and trade-offs
- Four methods compared
- Ice versus liquid nitrogen
- How much temperature drop ice can buy
- Limits of chilled water
- Chiller rental versus nitrogen
- Aggregate cooling versus drum injection
- Water-cement ratio and ice
- Precooling versus postcooling
- Night pours versus nitrogen
Planning a pour
- How a nitrogen pour actually runs — from the specification to the temperature record.
- Planning nitrogen volume
- Staging a continuous pour
- Plant hookup requirements
- Drum injection on a ready-mix truck
- What belongs in a cooling submittal
- Logging and documentation
- A summer plan for ready-mix plants
- SCMs and heat of hydration
- Lead time and mobilisation
Applications
All published guides and service pages
Every new educational and service page is listed here so it can be found from this hub, not only from search.
Company and services. About · Services hub · Injection · Mobile vs installed · Drum injection · Plant hookup · Supply logistics · Continuous pour staging · How a pour works · Lead time · Rental cost · Rent vs plant system
Comparisons and limits. Methods compared · Ice vs nitrogen · How much ice cools · w/c and ice · Chillers vs nitrogen · Chilled-water limits · Aggregates vs drum injection · Night pours vs nitrogen · When not to use nitrogen · Precooling vs postcooling
Specifications and documentation. Placement vs peak · Temperature differential · Thermal cracking · ACI 305 · ACI 207 · DEF and temperature · TCP documentation · Plan vs cooling scope · Submittals · Specifier language · Monitoring and the record · Planning volume
Applications and materials. Mat foundations · Wastewater plants · Equipment pads · Wind turbine foundations · Power plants · Highway and DOT · Hot-weather shotcrete · Ready-mix summer plan · SCMs and heat · High-early strength and heat · Plastic shrinkage · Exclusion zones · Service areas
Related Pages
Send Us the Spec and the Pour Date
Tell us the maximum placement temperature, the volume, the location, and when you are pouring.