Specifications
Specifier Language for Concrete Cooling
A clear temperature limit, a clear point of measurement, and a method clause that allows the tools that can actually hit the number will do more for a pour than a vague instruction to “cool the concrete.”
On this page
Start with a number and a place to measure it
If the project needs a maximum placement temperature, say so, and say where it is measured: at discharge, at delivery, at the point of placement, or at another defined location. If it needs a peak or a differential, say those separately, with the monitoring points and the period that matter. A single sentence that says “concrete shall be cooled” without a number is an argument waiting to happen, not a requirement.
Use the project’s own units and the project’s own definitions. If you are citing ACI 305 or ACI 207, cite the edition you mean, and still write the project-specific limits you want. Committee documents are guidance. The specification is the contract.
We are not offering canned specification text as a drop-in product, and we are not acting as the specifier. The language on this page is a set of reminders for people who are already writing or reviewing a document.

How to talk about methods without boxing the job in
It is usually better to allow a set of methods that can meet the limit — cooler ingredients, chilled water, ice within the mix allowance, night placement, nitrogen injection — than to name one method and forbid the others. The cheapest method that meets the number should be legal. The method that is needed when the cheap ones run out should also be legal.
If you want to name liquid nitrogen injection as an accepted method, name it as such, not as the only method, unless you have a reason to require it. If you want a submittal describing the method that will actually be used, say that, and say when it is due. If you want a temperature record, say who keeps it and what it must include.
See submittals and the plan versus the cooling scope.
Phrases that cause trouble
A requirement that cannot be met with the approved mix and the allowed methods is trouble. A placement cap with no measurement point is trouble. A peak limit with no monitoring requirement is trouble. A clause that treats nitrogen as a cure-all for cracking, DEF, or finishing problems is trouble. A clause that forbids “chemicals” in a way that accidentally forbids nitrogen, or that forbids “adding anything” in a way that confuses ice with injection, should be read twice.
We will not write scare stories about particular failed documents. We will say, on a job we are asked to price, when the clause and the mix appear to be in conflict, so that the conflict can be resolved before the pour date.
If you want a review, not a ghostwritten spec
Send the draft clause, or the current specification, with the kind of placements you are trying to protect. We can tell you whether the cooling method language is workable in the field, and what we would need in a submittal or a record. We will not stamp the document, and we will not pretend to be your specification consultant of record.
Will you provide standard specification text we can paste?
No. We will discuss what a workable clause needs to include. The writing stays with the specifier.
Should a specification require nitrogen by name?
Only if you have a reason to require that method. It is usually better to require the temperature and allow the methods that can meet it, including nitrogen.
Where should the temperature be measured?
Wherever you mean to enforce it. Write that location. A plant leaving temperature and a placement temperature are not the same thing after a long haul.
Related Pages
Send Us the Spec and the Pour Date
Tell us the maximum placement temperature, the volume, the location, and when you are pouring.