For Producers
A Ready-Mix Summer Temperature Plan
A summer plan is not a single gadget. It is a decision, made before the first really hot week, about how your plant will hit placement temperatures without improvising at the ticket window.
On this page
Build the plan before the hot week, not during it
The plants that struggle in July are often the plants that could have made a plan in April. You already know, in outline, which customers write a maximum placement temperature, which mixes have little water left to replace with ice, and which hauls are long enough to gain heat on the road. Write that down while the weather is still mild.
A useful plan names the levers you will use first — pour time, stockpile practice, chilled water, ice — and the point at which you will call for nitrogen rather than stretching the mix. It also names who at the plant can make that call, because a temperature miss at noon is not the moment to invent a chain of command.

The levers that should already be in the yard
Stockpiles in the sun are often the largest heat source in the mix. Shade, timing of delivery, and wetting where it is appropriate and permitted will do more on some days than any conversation about lances. Chilled batch water is the next familiar tool, and it is limited by how much of the mix is water. Ice is the step after that, limited by the approved replacement of that same water.
Scheduling still matters. An early load and a short wait at the job are cooling methods, even though they do not look like equipment. A plant that promises a tight cap and then lets trucks sit in a yard in full sun is undoing its own work. The plan should include dispatch, not only the batch booth.
None of this is an argument against nitrogen. It is the work nitrogen should not have to do alone. A producer who has already taken these steps, and who still cannot meet a cap on a locked mix, is the producer nitrogen is for.
When nitrogen becomes part of the standing plan
Add nitrogen to the plan when you can already see the weeks in which ice and water will not be enough, or when a customer will not let you change the mix. If that is a handful of pours, plan a mobile hookup and give yourself lead time. If it is going to be most of the summer, look at a standing or installed setup rather than remobilising every Thursday.
Be honest about hauls. A plant-side target is not a placement temperature after a long run. Some jobs will have to be cooled at the site, or will have to be batched closer, or will have to be scheduled for a cooler window. A summer plan that ignores the road is a plant plan, not a project plan.
See ready-mix plant cooling, plant hookup, and rent versus a plant system.
Talk to customers in the same language as the plan
Tell buyers, early, which specifications you can meet with ordinary summer practice and which ones will need a cooling mobilisation and a date commitment. A customer who hears that for the first time the week of the pour will not thank you. A customer who can put a cap, a yardage, and a window on a quote request can be served.
If you want help turning that conversation into a hookup plan for the coming season, send the kinds of caps you see, the plants involved, and the weeks that worry you. We do not need a perfect forecast. We need an honest one.
Is a summer plan the same as a thermal control plan?
No. A summer plan is how the plant will hit placement temperatures through the hot season. A thermal control plan is a project document that may also include peak temperature, differential, and monitoring.
Should every plant install a lance before summer?
No. Many plants only need a mobile hookup on the weeks that demand it. Install or a standing setup is for a producer who will be asked for cooled concrete often.
What is the most useful thing to write down first?
The caps your customers actually specify, the mixes that have little ice allowance left, and the hauls that gain the most heat.
Related Pages
Send Us the Spec and the Pour Date
Tell us the maximum placement temperature, the volume, the location, and when you are pouring.