Liquid nitrogen concrete cooling, lower 48 delivery
724-809-3385  ·  info@hydrotechtesting.com

Specifications

Concrete Cooling Submittals

If the project will ask for a submittal before you may cool a pour, the time to talk about the package is when the specification is still on the table, not the week the trucks are already booked.

Why a submittal shows up on this work

Owners and engineers who care about temperature usually want to know, before the pour, how the cap will be met. That request may live in the thermal control plan, in a hot-weather clause, or in a general submittal requirement for means and methods. The cooling scope has to be describable in that language: where injection happens, how the target is judged, how safety is handled, and how the temperature will be recorded.

There is no single national form. A state highway agency, a data-center owner, and a private industrial specifier will not ask for the same package. We will not offer a fake universal template. We will help you put together the package your project actually asked for.

A rebar cage being set for a foundation east of Queens Boulevard
Photo: MTA Capital Construction Mega Projects. CC BY 2.0, via Wikimedia Commons.

What typically belongs in the package

A useful cooling submittal usually describes the method (liquid nitrogen injection, at the plant or at the site), the configuration (mobile or installed), the way a load is brought to the target, and the measurements that will be taken. It should say who keeps the record and how a load that misses the target will be handled, if the specification already says that. Safety — exclusion zones, handling of a cryogenic liquid, coordination with the plant or the site — belongs in the same conversation, either in the submittal or in an attached plan.

It should not claim to replace the thermal control plan, the mix design, or the in-place monitoring plan. Those are separate documents, even when they are submitted as one binder. If the owner wants product data, crew qualifications, or a supply description, those requests should be stated rather than assumed. We will answer the ones that belong to the cooling scope and tell you which ones belong to someone else.

See thermal control plan documentation and specifier language for the documents that sit on either side of a submittal.

When to start the package

Start when the specification is known and the pour is real enough to have a location and a window. A submittal that has to travel through a review cycle cannot be written on the morning of the pour. If the project has a stated review time, work backward from it, and do not treat the cooling submittal as something that can skip the line.

Changes matter. If the hookup moves from the plant to the site, if the volume grows, or if a second plant is added, the package may need a revision. Tell us when the plan changes so the submitted method is still the method you will use.

What we will not put in a submittal

We will not invent certifications, project histories, or test results we do not have. We will not write your thermal control plan and call it a cooling submittal. We will not sign as the engineer of record. If a reviewer asks for something we cannot honestly provide, we will say so and suggest who should.

That restraint is part of the value of the package. A submittal that overreaches is a delay waiting to happen. A submittal that describes the cooling scope clearly is usually enough to have the real conversation with the reviewer.

Do all jobs require a cooling submittal?

No. Many pours only need a clear plan between the plant, the contractor, and the crew. Official submittals appear when the specification or the owner asks for them.

Can you write the whole thermal control plan as a submittal?

No. We can contribute the cooling-scope description and the temperature record we are responsible for. The plan itself stays with the contractor and the engineer.

How far ahead should we start?

Far enough to survive the project’s review cycle. Send the specification when you send the quote request if a submittal is likely.

Get a Quote

Send Us the Spec and the Pour Date

Tell us the maximum placement temperature, the volume, the location, and when you are pouring.