Liquid nitrogen concrete cooling, lower 48 delivery
724-809-3385  ·  info@hydrotechtesting.com

Service Areas

Concrete Cooling in Washington

Washington is two summers. Seattle’s July is mild by lower-48 standards. East of the Cascades, the same month can be a hot, dry placement-temperature problem, and a plan written for Puget Sound will be the wrong plan in the Columbia Basin.

The Cascades are the climate line

July climate normals for 1991–2020, compiled by Current Results from NOAA data, put Seattle at an average high of 77°F and an average low of 57°F. That is one of the mildest large-city Julys in the lower 48, and it is why a contractor in Puget Sound may think of nitrogen as someone else’s tool. It is also only the west-side story.

Eastern Washington — Spokane, the Yakima Valley, the Tri-Cities, and the Columbia Basin — sits in the mountains’ rain shadow. Summers there are typically hotter and drier than Seattle’s. This page will not invent a Spokane or a Kennewick normal, because those cities are not in the large-city table we are using. It will say, without hedging, that you must not plan a Tri-Cities mat as a Seattle evening, and that a west-side night pour is often enough for a modest cap when a basin job would already be talking about ice and, sometimes, nitrogen.

Even in Seattle, a heat week, a tight specification, or a mass foundation can still produce a cooling conversation. The 77°F normal is an average, not a ceiling, and the region has seen unusual heat in recent years. We will not invent those event statistics here. We will say that “Seattle is mild” is a starting point, not a waiver.

MassDOT photo of a foundation pour at the Fitchburg viaduct in 2020
Photo: MassDOT. Public domain, via Wikimedia Commons.

WSDOT, I-5, and I-90

The Washington State Department of Transportation is the statewide highway owner. I-5 is the west-side spine; I-90 is the crossing that makes the two climates one construction market. Ferry-adjacent and tight urban work in the Puget Sound cities, port work, and interior industrial and agricultural-town civil work in the basin are the usual settings. We will not invent a named floating bridge or a civic project as a credit. Your contract governs the temperature. We will not invent a WSDOT statewide limit.

Say which side of the mountains you are on

A mobilisation to Seattle, Tacoma, or Everett is a west-side job, often with a milder air temperature and a tighter urban yard. A mobilisation to Spokane, Yakima, Kennewick, Pasco, or Richland is a hotter, often longer-travel job, and should be described that way in the first call. The Seattle page is the metro companion for the Sound. If the work is actually in Portland or western Oregon, say so rather than stretching this page across the Columbia.

Cities that often appear include Seattle, Tacoma, Bellevue, Everett, Spokane, Vancouver, Yakima, Kennewick, Pasco, Richland, and Olympia, plus the plants that serve them.

What to send

Send the limits, the city, which side of the Cascades it sits on if that is not obvious, the volume, and the date. The quote form or 724-809-3385 is the contact.

Is Seattle too mild for nitrogen cooling?

Often a modest cap can be met with scheduling and ordinary plant practice. A tight specification, a heat week, or a mass placement can still need more. The 1991–2020 July normal is 77/57, not a waiver.

Do you treat Spokane as Seattle weather?

No. Eastern Washington is typically hotter and drier. This page does not invent a Spokane normal, and it will not let a basin job borrow Puget Sound air.

What temperature limit does WSDOT use?

Your contract and special provisions govern. We will not invent a statewide number.

Get a Quote

Send Us the Spec and the Pour Date

Tell us the maximum placement temperature, the volume, the location, and when you are pouring.