Liquid nitrogen concrete cooling, lower 48 delivery
724-809-3385  ·  info@hydrotechtesting.com

Applications

Concrete Cooling for Industrial Equipment Pads

A thick equipment pad or machine foundation can carry the same temperature limits as other mass placements, with the added inconvenience of an operating plant, a tight outage window, or a pad that has to be ready for a setting date.

Why pads become cooling jobs

Industrial pads are often thicker than a typical building footing, sometimes large enough in plan to run as a substantial pour, and often specified by an owner who already has a temperature habit from other work on the site. A placement cap, a peak limit, or a thermal control plan is not unusual. Neither is a short outage in which the pad has to be placed whether or not the weather is convenient.

The work does not require a gallery of invented mills, compressor stations, or process units. The pattern is ordinary: a thick slab or block on an industrial site, a specification with a number, and a schedule that is tied to equipment arrival or to a shutdown. Cooling is a way to defend the number and, sometimes, the date.

Federal Highway Administration photo of an MSE wall foundation concrete pour in Oregon
Photo: Federal Highway Administration. Public domain, via Wikimedia Commons.

What is different on an occupied site

Access, orientation, escort rules, and laydown are often tighter than on a greenfield mat. A nitrogen hookup and a supply position have to live with those rules. Night or weekend placements are common around operating plants, and they can help a placement cap, but they have to be planned as the actual window, including the gate and the briefing.

Some pads are small in yardage and still strict in temperature, which means mobilisation is a real part of the conversation even when the pour is short. Some are large enough to be staged like any other continuous placement. Say which one you have.

The cooling scope, kept in its lane

We precool the fresh concrete to the specified placement temperature, at the plant or at the site, and we document that work. We do not set anchor bolts, grout machines, or certify a vibration spec. If the pad is mass concrete, peak and differential remain the plan’s problem, helped, if at all, by a cooler start.

If the structure is closer to a treatment-plant basin or a power-generation foundation, see wastewater and water plants or power-plant work. The injection method is the same. The site process may not be.

What to send

Send the limits, the dimensions or yardage, the site city, the window, and any access rules you already know. If the pad is one of several in a shutdown, describe the sequence. If a particular producer is already chosen, include the plant location.

Are equipment pads always mass concrete?

No. Thickness and the project’s definition govern. Many are treated as mass concrete; you should read the specification.

Can you work inside a shutdown window?

If the window is long enough to mobilise and supply, and the site can accept the hookup. Send the dates early. Shutdown calendars do not usually stretch.

Do you need a plant-side hookup, or can you inject at the site?

Either, depending on the haul, the site rules, and where the temperature will be measured.

Get a Quote

Send Us the Spec and the Pour Date

Tell us the maximum placement temperature, the volume, the location, and when you are pouring.