Liquid nitrogen concrete cooling, lower 48 delivery
724-809-3385  ·  info@hydrotechtesting.com

The Company

About Concrete Cooling Rentals

A nitrogen field service company applying liquid nitrogen injection to mass pours, hot-weather placements, and temperature-critical specifications, across the lower 48.

Who we are

Concrete Cooling Rentals is a service line of NitroTech Rentals, which is part of the HydroTech Testing family. The same ownership, the same phone, and the same field discipline sit behind the water side, the gas side, and concrete temperature control.

We inject liquid nitrogen into fresh concrete at a ready-mix plant or at the pour site so a placement can meet a maximum temperature in the specification without adding water to the mix. Nitrogen cools by evaporation, not dilution. When the specification and the weather are in conflict, that difference is usually why someone calls.

The work is leased for the project rather than sold as a capital plant. Crews and equipment travel to you. There is no branch in every state, and we do not pretend otherwise. The practical questions are lead time, mobilisation, and whether nitrogen is actually the right method for the pour in front of you.

Workers finishing a freshly poured concrete foundation for a power substation
Photo: MTA Capital Construction Mega Projects. CC BY 2.0, via Wikimedia Commons.

Why the crews come out of nitrogen field work

Our operators come out of pipeline nitrogen, purging, and commissioning work. Cryogenic handling, exclusion zones, and documented results are routine in that work rather than exceptional, and that is the standard we bring to a pour.

A concrete cooling job is a planning problem before it is an equipment problem. We start with the maximum placement temperature, the mix, the volume, the placement rate, and the window you actually have, plus whatever thermal control plan the project is working to. If a simpler method gets you inside spec, we say so rather than forcing nitrogen onto a job that does not need it.

We are not a ready-mix supplier, a testing laboratory, or a designer of your mix or your thermal control plan. We handle the cooling scope and we do it on the pour date. Documentation of the temperature record is part of what you are buying, because undocumented results do not satisfy a thermal control plan any more than they pass in commissioning work.

How the service is set up

Liquid nitrogen is injected through a lance, either into the drum of a ready-mix truck or into the mixer at the batch plant. Flow is metered and stopped when the load reaches target, so cooling answers to the truck in front of the operator rather than to a batching decision made hours earlier.

Two configurations cover most work. A mobile manual-lance hookup with an elevated platform and truck bay is set up for the job and struck when it is finished. An installed automated lance on a foundation at the plant is the option when temperature-controlled concrete is a standing requirement. Most first projects are the mobile one.

The equipment comes to the plant or the site. There is no permanent chiller plant to build, and no waiting on a facility upgrade to make a pour date. Supply is staged with the placement rate in mind, which is why a continuous pour and a one-off mat are planned differently even when the target temperature is the same.

Where we work and how to reach us

We mobilise across the lower 48. Distance and the calendar both matter: hot-weather season concentrates demand into the same weeks in a region, so a date that was easy in April is not necessarily easy in July. The service areas pages describe the markets where this work concentrates, not a hard fence around where we will go.

The public contact for the service is Henry Froats Jr. on 724-809-3385, or info@hydrotechtesting.com. The quote form on this site sends those details to us directly so we can size the work from the specification rather than from a guess.

Concrete Cooling Rentals does not sell online, does not run user accounts, and does not ask you to buy equipment. If you have a specification, a volume, a location, and a pour date, that is enough to start a real conversation.

Is Concrete Cooling Rentals a separate company from HydroTech Testing?

It is a NitroTech Rentals service line in the HydroTech Testing family. Same ownership and the same phone, with the cooling work kept as its own operation because it is a different discipline from pipeline nitrogen.

Do you design the mix or the thermal control plan?

No. We size and carry out the cooling scope. Your engineer remains responsible for the mix and the plan.

Get a Quote

Send Us the Spec and the Pour Date

Tell us the maximum placement temperature, the volume, the location, and when you are pouring.